Skytec SP1000 - 10” (25 cm) 8 Ω speaker for woofer replacement

Skytec SP1000 - 10” (25 cm) 8 Ω speaker for woofer replacement

The Skytec SP1000 is a 10” (25cm), 8Ω woofer designed as a direct replacement for PA speakers, installations and DIY projects. Its architecture combines rigid suspension to control cone displacement, a vented ferrite magnet for improved heat dissipation and a 38mm (1.5”) voice coil . It delivers 100W RMS and 250W max , a sensitivity of 93dB (1W/1m) and a frequency response of 55–4,000Hz , resulting in defined bass and mid-bass in two-way systems. Installation is simple thanks to its spade (Faston) terminals and standard dimensions: 230mm cutout diameter , 95mm mounting depth and approx. 258mm outer diameter (total height 110mm). The assembly weighs approx. 2.45kg and the magnet has a mass of 30oz (≈ 0.85kg ).

Main features

• 10” (25 cm), 8 Ω : compatibility with most 8 ohm amplifiers and enclosures.
• 100W RMS / 250W max : adequate power for compact PA, monitors and fixed installation.
• Sensitivity 93 dB (1W/1m) and response 55–4,000 Hz : clear bass/mid-bass in 2-way systems.
• 38mm (1.5”) coil and vented magnet (≈ 0.85kg) for improved thermal resistance.
• Rigid suspension : less distortion at high levels and greater cone control.
• Spade terminals (Faston) : fast and reliable connection for replacements.
• Standard mounting : cut-out 230 mm, depth 95 mm, outside ~258 mm.

Product benefits

• Direct replacement that restores the performance of 10” speakers without modifying the speaker.
• Reliability in continuous use thanks to the ventilated coil/magnet assembly and robust suspension.
• Consistent low and mid-bass performance for vocals, rhythm guitar, keyboards, and general reinforcement.
• Easy installation with universally compatible measurements and Faston connectors.

Use cases

• Replacing woofers in 10” passive enclosures.
• DIY construction of 2-way systems combining it with a tweeter or compression driver.
• Maintenance of rental equipment and mobile sound.

Compatibility and installation

Verify that the system is operating at 8 ohms and that the mounting dimensions ( cutout 230 mm , depth 95 mm ) fit the enclosure. Apply gasket to ensure a tight seal between the chassis and front panel and use appropriate hardware. In 2-way systems, respect the manufacturer's original crossover or adjust the crossover frequency if you modify the assembly design.

Frequently Asked Questions

• Can it be used as a dedicated subwoofer? No. Its usable range starts at 55 Hz ; it functions as a bass/mid-bass woofer in two-way systems.
• Can I replace a 4 Ω speaker with this 8 Ω speaker? This will change the overall impedance and load of the amplifier. Use this model if the speaker is designed for 8 Ω .
• What type of connection does it use? Spade terminals (Faston) for quick connection.

Description for projects

10” (25 cm) , 8 Ω woofer; 100 W RMS ( 250 W max ); sensitivity 93 dB (1W/1m) ; response 55–4,000 Hz ; voice coil 38 mm (1.5”) ; vented ferrite magnet 30 oz (≈ 0.85 kg ); spade terminals ; outer diameter ~258 mm ; cutout diameter 230 mm ; mounting depth 95 mm ; total height 110 mm ; weight ~2.45 kg ; black.