MuxLab 500115 - LongReach IP PoE CCTV Extender Kit over Coaxial (Up to 600m - 1000m)
Optimize and modernize your security infrastructure with the MuxLab 500115 , an advanced signal extension kit designed to overcome the distance limitations of conventional Ethernet. This "LongReach" system is the ultimate solution for integrators who need to deploy next-generation IP cameras using existing coaxial cabling, eliminating the need for costly fiber optic or UTP cabling reinstallations over long distances.
The kit functions as a robust transceiver bridge, enabling IP data transmission and Power over Ethernet (PoE) over impressive distances. While a standard network limits connections to 100 meters, the MuxLab 500115 breaks this limit, reaching up to 600 meters with active PoE and up to 1000 meters for data transmission (depending on the power configuration). It's the perfect tool for facilitating the transition from analog CCTV systems to digital IP surveillance without civil works or complex rewiring.
Main features
This device stands out for its media conversion capabilities and intelligent power management. By connecting your IP cameras to the transmitter via Cat 5e/6 network cables, the system converts the signal to travel over coaxial cable (RG59/RG6) and reconverts it at the receiving end, maintaining exceptional data integrity.
-
Extended Range: Transmits Ethernet signal up to 1000 meters (3280 feet) for data, or up to 600 meters (1970 feet) also supplying PoE power (up to 30W).
-
Full PoE Support: Compatible with IEEE 802.3af/at standards. The system can power PTZ or fixed IP cameras directly through coaxial cable, simplifying electrical installation in remote locations.
-
Hybrid Connectivity: Designed with RJ45 interfaces for network/camera connection and BNC connectors for long-distance coaxial link.
-
High-Speed Performance: Maintains speeds of up to 100 Mbps (Full Duplex) over extended distances, ensuring smooth high-definition video transmissions.
-
Plug & Play: No software configuration or drivers required; the link is established automatically when connecting devices.
Benefits of migrating to IP over Coaxial
The MuxLab 500115 is designed to maximize the return on investment in security infrastructure. Its main benefit lies in the substantial cost and time savings : it allows the reuse of coaxial cable from old analog cameras to install new digital IP cameras. This eliminates the need to remove false ceilings, dig trenches, or lay new UTP cable in historic buildings or complex industrial environments.
Furthermore, by centralizing power via PoE, it reduces points of failure and facilitates the use of uninterruptible power supply (UPS) systems from the control room, ensuring that the cameras continue recording even if there is a power outage at the remote end.
Ideal use cases
-
University and Hospital Campuses: Connection of perimeter cameras or in annex buildings using old coaxial CCTV lines.
-
Parking Lots and Garages: Deployment of cameras in remote areas where the distance exceeds 100 meters from the main switch.
-
Banking and Retail Security Upgrade: Migration from analog cameras to 4K IP without interrupting business operations with cabling work.
-
Industrial Access Control: Connecting card readers and IP video intercoms at remote doors.
Frequently Asked Questions
What type of cable do I need to connect the camera to the device?
You must use standard Cat 5e or Cat 6 network cables to connect the camera to the extender's RJ45 port.
Is it necessary to feed both ends?
The system supports PoE. When used with a suitable PoE switch at the receiver end, it can power the transmitter and camera over the coaxial cable (up to certain distances). For longer distances or high-power cameras, the use of additional power supplies (such as the optional 500116 model) is recommended.
Does the kit include the transmitter and receiver?
Yes, the 500115 model is a complete kit that includes both the Device Side and Network Side units.
Project description
Ethernet and PoE extender kit over coaxial cable designed for long-range IP video surveillance applications. The system, comprised of a pair of transceivers (Camera Side and Network Side), enables 100Base-T data transmission and PoE power (IEEE 802.3af/at) at distances up to 600 meters, extending to 1000 meters for data-only transmission. It features RJ45 interfaces for connecting to Cat5e/6 network equipment and BNC connectors for the transmission link. It supports a bandwidth of up to 100 Mbps symmetrical, ideal for megapixel IP cameras. The kit features a compact metal housing and a passive/active hardware design depending on the power configuration.
