JBL Professional PD743i-215 - Ultra-High Output 3-Way Full-Range Speaker System, 40° x 30° Horn

Out of stock
SKU: PD743I-215
Regular price 22.024,53 € inc. VAT

If you have any questions about this product, we can assist you by filling out the contact form

The PD743i-215™ Precision Directivity Loudspeaker provides high-impact sound reinforcement at throw distances beyond the reach of traditional single-driver designs. A single module produces over 104 dB SPL (continuous) at distances of 50 m (165 ft). The PD764i-215 can be used in clusters with other PD family modules or individually as part of a distributed system. Features 40° by 30° coverage pattern - Symmetrical front dimensions allow horizontal or vertical orientation within an array. IFS™ Interference-Free Summing dual HF driver module eliminates destructive interference and increases output by 6 dB. Dual 2432H compression drivers with 3™ diaphragms. Dual 8™ CMCD-82H loaded-cone midrange drivers provide 6 dB greater output than traditional designs. Dual 15™ Low-frequency Differential Drive®, dual voice coil woofers with dual magnetic separation. Pattern control maintained below 400 Hz. Coaxial mid/high-frequency module design improves midrange disposition and minimizes size. Integrated mounting system simplifies assembly design and construction.
  • Brand:JBL Professional
  • Model:PD743i-215
  • Guy:Very high output, 3-way, horn-loaded, full-range speaker system
  • Coverage pattern:40° × 30°
  • Featured Technologies:IFS™ (Interference Free Sum), CMCD™ (Cone Midrange Compression Driver), Differential Drive®
  • LF Transducers:2 × 15" JBL 2265H, 75mm dual coil
  • MF Transducers:2 × JBL CMCD-82H 8", 75mm dual coil
  • HF Transducers:2 × JBL 2432H, 1.5" output, 3" diaphragm
  • Frequency range (-10 dB):36.5 Hz – 19.5 kHz
  • Frequency response (±3 dB):42 Hz – 18.5 kHz
  • Directivity Index (DI):16 dB
  • Sensitivity (1 W/1 m):LF 103 dB; Passive M/H 110 dB
  • Maximum peak SPL (1 m):144 dB (bi-amp mode)
  • AES Power:LF 1000 W (peak 4000 W); M/H 400 W (peak 1600 W)
  • Crossover frequencies:215 Hz and 1.3 kHz
  • Amplification mode:Bi-amplified with passive M/H crossover (tri-amp option)
  • Nominal impedances:LF 4 Ω; M/H 4 Ω
  • Recommended processing:DSP Presets for Crown I-Tech HD / IT4x3500HD
  • Standard connectivity:NL4 Speakon® and CE terminal block in parallel (loop-through)
  • Optional connectivity:NL8 for tri-amping
  • WRC/WRX versions:Outdoor enclosure and hardware; three-layer grille; 4 x 16 AWG captive cable, 6.1 m
  • Climate protection (series reference):IP55 (see WRC/WRX sheet and specific plans)
  • Pattern control:Maintained up to ~500 Hz
  • Suspension points:52 × M10 (12 top and bottom, 11 per side, 6 rear)
  • Enclosure material:18/16 mm birch plywood, DuraFlex™ finish
  • Rack:Perforated steel with foam back; three-layer stainless steel on the WRC/WRX
  • Dimensions (H × W × D):991 × 991 × 1145.8 mm
  • Net weight:152 kg
  • Typical applications:Stadiums, arenas, racetracks, circuits, large venues
  • Type New
  • Vendor JBL PROFESSIONAL
  • SKU PD743I-215

Buy JBL Professional PD743i-215 - Ultra-High Output 3-Way Full-Range Speaker System, 40° x 30° Horn