Audibax Pro R1 PoE PSU - 12 V / 25 W PoE Splitter for non-PoE IP cameras (RJ45 + jack, 802.3af/at)

Audibax Pro R1 PoE PSU - 12 V / 25 W PoE Splitter for non-PoE IP cameras (RJ45 + jack, 802.3af/at)

The Audibax Pro R1 PoE PSU is a PoE splitter that allows you to power and connect IP cameras or other 12 V DC devices that do not have native PoE, using a single Ethernet cable from an 802.3af / at PoE switch / injector . The device receives power via RJ45 (PoE / PoE +) and "splits" the signal into two outputs : RJ45 (data) and DC jack (12 V) , simplifying installation and reducing costs and local power supplies. With a capacity of up to 25 W and IEEE 802.3af / 802.3at compatibility, it is a reliable and clean solution for CCTV, access control, IoT and signage projects, among others.

Main features

• Function: PoE Splitter to power non-PoE equipment with 12 V DC output .
• Inputs/outputs: RJ45 input (PoE) and dual output: RJ45 data + DC jack .
• Power compatibility: IEEE 802.3af and 802.3at (PoE+) .
• Maximum power: up to 25 W at 12 V DC .
• Simplified installation: a single network cable carries data and power to the point of consumption.
• Professionally designed for installation: compact in-line format, ideal for technical enclosures or behind equipment.

Product benefits

• Savings on local wiring and power supplies: the need for power outlets near the device is eliminated.
• Faster and more orderly deployments: fewer transformers, fewer points of failure, and less maintenance.
• Guaranteed compatibility: Works with standard PoE/PoE+ switches and injectors .
• Versatility: suitable for 12V IP cameras, gateways, mini-PCs, readers, signage, etc. (depending on consumption).

Use cases

• CCTV/Security: Powering 12V IP cameras in locations without a nearby power outlet.
• Retail / Kiosks / Signage: 12V players and controllers connected by a single Ethernet cable.
• Buildings and IoT: 12V controllers, sensors, or readers integrated into the building's PoE network.

Frequently Asked Questions

• Is it a switch? No. It's a splitter (PoE splitter): it separates data and power from the PoE input to deliver 12 V DC through the jack and data through the RJ-45.
• What PoE standards does it support? IEEE 802.3af and 802.3at (PoE+) , with up to 25W output at 12V.
• Does it work with any 12V camera? Yes, as long as the device's power consumption doesn't exceed the available power and it uses 12V DC .
• Data rate (10/100/1000)? The manufacturer doesn't specify the link speed on the datasheet. If your network requires Gigabit , confirm this in your project before installation.

Description for projects

PoE splitter for non-PoE devices; RJ45 input (PoE/PoE+) ; outputs: RJ45 (data) + DC 12 V jack ; maximum power 25 W ; IEEE 802.3af / 802.3at compatibility; recommended use: IP cameras and 12 V equipment in professional installations.