Ibiza Light & Sound AMP1000-MKII – 2x800W MOSFET PA amplifier in 19″ 2U rack
The Ibiza Light & Sound AMP1000-MKII is a high-power, reliable stereo amplifier designed for professional PA systems, touring, and fixed events. Its MOSFET technology guarantees dynamic and stable performance, delivering up to 2 × 800 W into 4 Ω (2 × 600 W into 8 Ω), with total harmonic distortion less than 1% and a frequency response of 20 Hz to 20 kHz. Mounted in a robust 2U metal chassis for a 19″ rack with handles, it combines recessed volume controls, soft-start, low-noise fans, and electronic protections against short circuits, overload, DC offset, and overtemperature.
Main features
-
Maximum power: 2 × 800 W @ 4 Ω / 2 × 600 W @ 8 Ω
-
Frequency response: 20 Hz – 20 kHz
-
Distortion (THD): < 1 % @ 1 kHz
-
Signal-to-noise ratio: > 89 dB
-
Channel separation: 52 dB
-
Inputs: RCA and 6.35 mm jack (level 850 mV, impedance 20 kΩ)
-
Outputs: Speakon NL4 and high-current terminals (impedance 4–8 Ω)
-
Cooling: Dual fan with thermal control
-
Protections: short circuits, overload, DC offset, thermostatic
-
Progressive start: soft-start to avoid peaks in the network
-
Monitoring: Independent LED VU meters per channel
-
Rack format: 482 × 88 × 300 mm (19″, 2U)
Product benefits
-
Maximum reliability: advanced protections and MOSFETs for continuous use without failures
-
Professional installation: 2U rack chassis with handles makes assembly and transport easy
-
Precise control: built-in potentiometers and VU meters for quick level adjustment
-
Safe operation: soft-start and optimized ventilation for extended service life
-
Full compatibility: Speakon outputs and terminals adapted to 4 Ω and 8 Ω speakers
Use cases
- PA systems in concert halls, auditoriums and theaters
- Sound reinforcement for DJ sets, festivals, and outdoor events
- Fixed installations in bars, clubs and convention centers
- Sound support in audiovisual productions and recording studios
Frequently Asked Questions
-
Can I connect speakers of different impedances? Yes; the amplifier supports 4 Ω and 8 Ω simultaneously on each channel.
-
How do I prevent overheating? Keep space around the rack and make sure the fans are not obstructed.
-
What cross-section Speakon cable should I use? Speaker cable ≥ 2.5 mm² with standard NL4 connectors is recommended.
Description for projects
2U 19″ rack MOSFET stereo amplifier, 2×800 W @ 4 Ω (600 W @ 8 Ω), 20 Hz–20 kHz, THD < 1 %, S/N > 89 dB, RCA/jack inputs, Speakon/terminal outputs, soft-start, integrated fans and protections.
