Samson AirLine Micro Camera (E1) - Wireless Lavalier Camera System with Ultra-Compact Rechargeable Receiver

Samson AirLine Micro Camera (E1) - Wireless Lavalier Camera System with Ultra-Compact Rechargeable Receiver

The Samson AirLine Micro Camera (E1) is a UHF wireless camera kit that combines the AL2 bodypack transmitter with lavalier microphone and the low-profile AR2 micro receiver . Designed for interviews, reporting, streaming and videography , it offers simple operation, rechargeable Li-ion batteries in both transmitter and receiver (≈ 10 hours of use) and a switchable 3.5mm mic/line output for direct integration with cameras, recorders or mixing consoles. It operates in the E1 band (863.125 MHz) within the ISM range 863–865 MHz (subject to local regulations), with a typical range of up to 100 m line-of-sight.

The AR2 receiver features dual 1/4" λ antennas , RF, battery and status indicators , and tone-key + auto-mute circuitry to keep the signal clear of interference. The set includes an AR2DT dual-dock cradle for simultaneously charging both the AL2 and AR2 or powering the receiver while in use, a shoe mount adapter for mounting the AR2 on a camera, 3.5mm–3.5mm and 3.5mm–XLR cables , a universal charger with a USB Y-cable (2× mini-USB) , a carrying case , and an LM10 omnidirectional lavalier microphone with windscreen.

Main features

• Camera set with AL2 (belt pack) + AR2 (micro-receiver) and LM10 (lavalier omni).
• Band E1 (EU): 863.125 MHz ; ISM range 863–865 MHz.
• Battery life: Internal lithium-ion batteries in AL2 and AR2, ≈ 10 h ; charging via USB (mini-USB) or AR2DT base .
• Receiver output: 3.5 mm unbalanced with Mic/Line switch ; impedance 600 Ω; –30 dBV (Mic) / –10 dBV (Line) .
• Indicators and Controls: Multi-color LED on AR2 (power, tone, mute, peak) + battery LED; AL2 with single button (power/mute/volume) and selectable attenuation.
• Link stability: dual antenna in AR2, tone-key and auto-mute to avoid noise if carrier is lost.
• Audio performance: 50 Hz–15 kHz response, S/N 90 dB (Ap) , THD <1 % .
• Range: up to 100 m (line of sight); AL2 RF power: 10 mW ERP .
• Camera Mount: Shoe adapter included; 3.5mm–3.5mm and 3.5mm–XLR cables included.
• Transport: case, windproof foam and universal charger (100–240 V) with USB Y cable.

Product benefits

• Ready to roll: Everything you need to capture professional audio on DSLR/CSC/ENG cameras without any extra accessories.
• Clean and reliable operation: tone-key + auto-mute and dual antenna on the receiver to minimize dropouts and noise.
• True mobility: internal rechargeable batteries (≈10 h) and AR2DT base to charge and/or power while you work.
• Direct integration: 3.5mm output with mic or line level to adapt to camera or mixer inputs.

Use cases

• Indoor/outdoor interviews and reports with discreet lavalier and minimal on-camera cabling.
• Streaming and content creation with immediate improvement in intelligibility compared to the internal microphone.
• Events and presentations with quick on-camera setup and autonomy for full days.

Frequently Asked Questions

• Does it include a lapel microphone? Yes, the LM10 omnidirectional clip-on microphone with windscreen.
• Can I charge both devices at the same time? Yes, with the AR2DT base or the included USB Y cable .
• Does it work with my camera? Yes, the AR2 outputs a 3.5mm (mic/line level) signal and includes an XLR cable if your equipment requires it.
• What's the range? Up to 100 m line of sight (walls/RF environments may reduce this range).

Description for projects

UHF wireless camera system (lavalier); E1 version 863.125 MHz ; range up to 100 m (LdV); response 50 Hz–15 kHz ; AR2 receiver with 3.5 mm output (Mic –30 dBV / Line –10 dBV, 600 Ω), dual antenna , RF/battery/status indicators; AL2 transmitter (10 mW ERP) with single control and attenuation; internal Li-ion batteries ≈10 h (AL2 and AR2); AR2DT base with USB power supply; accessories: shoe adapter, 3.5–3.5 and 3.5–XLR cables, 100–240 V charger + USB Y-cable, case, LM10 lavalier omni with foams.