Audibax Pro Black 3 Pins 0.5 m - Low Capacitance (110 Ω) XLR Male to Female DMX Cable
The Audibax Pro Black DMX Cable 3 Pins 0.5 m is designed for stable DMX data transmission in professional lighting environments. It features high-performance 3-pin XLR connectors (male to female) and a low-capacitance cable with a nominal impedance of 110 Ω , ideal for DMX lines. Its braided shielding , PE insulation , and durable PVC jacket minimize noise, improve interference immunity, and ensure a clean signal even in demanding installations. With an outer diameter of 6 mm and a 2 x 0.25 mm² conductor size , it is a robust and easy-to-run patch cable for racks, trusses, and stages, perfect for short jumps between luminaires or between the controller and the first unit in the chain.
Main features
-
Connectors: XLR 3 pin male (A) to XLR 3 pin female (B) , with silver contacts.
-
Nominal impedance: 110 Ω, optimized for DMX signals.
-
Low capacitance: nominal value 72 pF to preserve data integrity.
-
Cable construction: 2 x 0.25 mm² (twisted pair) with braided shielding.
-
Insulation: PE (polyethylene) with high-strength PVC coating .
-
Outer diameter: 6 mm; length: 0.5 m; color: black.
-
Low-noise design with full dynamic reproduction and maximum stability in the line.
-
Series: Pro Black, geared towards professional live use, rental and fixed installation.
Product benefits
-
DMX reliability : impedance and low capacitance reduce reflections and losses, ensuring consistent communication between controller and luminaires.
-
Protection against interference : braided shielding and PE insulation limit induced noise in environments with dimmers, power supplies and nearby power wiring.
-
Professional connectivity : High-performance 3-pin XLR connectors with silver-plated contacts for a firm coupling and low contact resistance.
-
Comfortable handling : 6 mm diameter and durable PVC cover to withstand continuous assembly and disassembly.
-
Short and precise patch cord : 0.5 m in length for neat bridges between equipment, avoiding unnecessary cable loops.
Use cases
-
Short bridge between two adjacent DMX projectors or effects on truss or bar.
-
Console outputs : connection of the DMX controller to the first splitter or fixture.
-
Internal racks and patch panels in flight cases, where order and exact lengths are required.
-
Fixed installation in theaters, auditoriums, clubs and temples with short and orderly runs.
Frequently Asked Questions
-
Is this cable male-female or male-male?
It is male (XLR3) to female (XLR3) , the standard configuration for linking DMX equipment.
-
Why does impedance matter in DMX?
DMX lines operate over the RS-485 differential bus; a suitable impedance (around 110–120 Ω) helps to minimize reflections and data errors in the chain.
-
Do I need a terminator?
It is recommended to terminate the last light fixture with 120 Ω between pins 2 and 3 to stabilize the line, especially in longer runs or chains with many devices.
-
3 pins or 5 pins?
The standard prefers 5 pins, but the use of 3 pins is widespread in the industry and is compatible if the equipment supports it.
-
Is it suitable for audio?
Although it uses XLR connectors, it's designed for DMX data . For balanced audio, a dedicated mic/line cable is preferable.
-
Is it suitable for outdoor use?
No specific watertightness rating is declared. For outdoor use, use conduits or cables with appropriate environmental protection and IP rating.
Useful technical notes
- The DMX chain should be wired in daisy chain (input-output) and not in star; use splitters when you need branches.
- Avoid running DMX cables in parallel and very close to power cables to reduce coupling and interference.
Project description
3-pin DMX cable, 0.5 m long, Pro Black series. XLR3 connectors: male (A) to female (B), silver-plated contacts. 2 x 0.25 mm² conductors with braided shielding; PE insulation and PVC jacket. 6 mm outer diameter. Nominal impedance 110 Ω; nominal capacitance 72 pF. Black.
