GUIL

GUIL ELC-750 - Top-loading telescopic lifting tower. Removable legs and wheeled base.

In stock
SKU: ELC-750
(0)
1.012,48 € inc. VAT

If you have any questions about this product, we can assist you by filling out the contact form

Ask an expert

Chat Email +34 621046470

Max Height 4.50 m / Max. Load 150kg

Ref. ELC-750

Telescopic mechanical lifting tower certified for lifting loads of up to 150 kg to a maximum height of 4.50 meters.

The ELC-750 elevator is one of the most compact in its range, with a folded height of only 1.53 meters.

SPECIFICATIONS ELC-750
Maximum height: 4.50m
Maximum load: 150kg
Security: ASB System (Automatic Locking System)
Winch: AL-KO 450 (450 kg)
Wheels: Fastening by means of a plate with 4 screws
Folded Measurements: Height: 1.53 m – Base: 41x41cm
Material: Steel
In accordance with the Regulations: DGUV 17 & 18, DGUV Rule 115-002 (Former BGV-C1 )
DIN EN 17206 (Replaces DIN 56950-1 ), 2006/42/EC
Net weight: 49kg
Adapters: Ø 35mm


GUARANTEED SECURITY:

The elevator ref. ELC-750 is provided with two security systems; guaranteeing maximum reliability during the lifting and lowering of loads:

1. Self-braking winch Austrian manufacturer AL-KO Ref. AL-KO 450 (450kg)
The self-braking system of the winch prevents recoil and stops the load at the desired height; Once the desired height is reached, when you stop operating the winch lever, its brake mechanism begins to act, preventing recoil and paralyzing the load.

2. ASB system (Automatic Locking Security System)
Zipper mechanism with safety pins. In the extreme case of cable breakage, the system would immediately block the tower section, preventing any movement of the load.

The construction of this elevator is carried out with the most advanced welding equipment that guarantees maximum safety and resistance, meeting at all times the requirements of solidity, maneuverability and lightness necessary for lifting loads.

The ELC-750 lifting towers meet the safety requirements according to the following standards and regulations:

  • DGUV Regulation 17 & 18
  • DGUV Rule 115-002
  • DIN 56950-1
  • 2006/42/EC

VERY IMPORTANT: ELC TOWERS ARE NOT MANUFACTURED FOR LIFT OF PEOPLE.


BASE:

Compact 41 x 41 cm base specially designed to allow access to the tower in small spaces.

The tower is equipped with four removable legs equipped with double pitch leveling screws (higher speed) , with chrome-plated steel and injected rubber non-slip discs which guarantees a perfect fit to all types of surfaces.

TELESCOPIC PROFILES:

The lifting tower is made up of 4 sections/sections of high-strength steel finished in special epoxy paint for outdoors. Its finish allows us to assemble the lifting tower outdoors, guaranteeing its good maintenance and avoiding rusting of its parts.

The sections are equipped with:

  1. cap welded on its terminal for greater reinforcement.
  2. Adjustment between sections to avoid looseness (ergonomically designed metal knob)
  3. Protective plates to cover the pulleys; avoiding damage during handling and transport of the tower and preventing the cable from coming out of them.
  4. The last section is provided with a reinforcement bushing


LOAD LIFT:

The lifting of the load is carried out by means of a self-braking manual winch AL-KO 450 (450 kg).

Once the desired height is reached, when you stop operating the winch lever, its brake mechanism begins to act, preventing recoil and paralyzing the load.

The sections are extended by sets of pulleys with bearings and galvanized steel cable (Composition: 7×19+0) specially designed for lifting loads ( DIN 3060 ).

 

Note: The telescopic sections are fixed at the desired height using locking devices (essential during use).

To level the tower, the spindle of each of the stabilizer arms is adjusted, using the spirit level as a reference.


TRANSPORT:

Light and compact tower specially designed for easy transport once folded (it has a folded height of only 1.53 meters).

The tower is provided with Four heavy-duty swivel wheels, two of them with brakes . The wheels are fixed to the base using a sheet of steel, with four screws per wheel; In this way, maximum fixation is guaranteed even in jobs where it is necessary to move the tower over uneven ground.

The compact design of the lift allows for comfortable and easy handling to your workplace. A single technician can transport and manipulate an ELC-750 lift, saving time and increasing productivity. The ELC-750 towers are equipped with a handle for easy transportation.

DOWNLOADS:

  • Type Hardware and Scenarios
  • Vendor GUIL
  • SKU ELC-750

Buy GUIL ELC-750 - Top-loading telescopic lifting tower. Removable legs and wheeled base.