GUIL

Top loading telescopic lifting tower. Removable legs and base with wheels. ELC-735

Out of stock
SKU: ELC-735
(0)
751,70 € inc. VAT

If you have any questions about this product, we can assist you by filling out the contact form

Ask an expert

Chat Email +34 621046470

Max Height 5.00 m / Max. Load 125kg

Ref. ELC-735

Certified lightweight telescopic tower for lifting loads of up to 125 kg to a maximum height of 5.00 meters.

SPECIFICATIONS ELC-735
Maximum height: 5.00m
Maximum load: 125kg
Folded measurements: 1.75 m – Base: 38 x 30 cm
Work Surface Ø 210 cm
Security: ASB System (Automatic Locking System)
Winch: AL-KO 450
Wheels: 2 x Ø 100 mm for wheelbarrow-type transport
Material: Steel
In accordance with the Regulations: DGUV 17 & 18, DGUV Rule 115-002 (Former BGV-C1 )
DIN EN 17206 (Replaces DIN 56950-1 ), 2006/42/EC
Net weight: 46kg
Adapters: Ø 35mm


GUARANTEED SECURITY:

The ELC-735 elevator is provided with two security systems ; guaranteeing maximum safety during the lifting and lowering process of loads:

  1. Self-braking winch Austrian manufacturer AL-KO Ref. AL-KO 450 . The self-braking system of the winch prevents recoil and stops the load at the desired height; Once the desired height is reached, when you stop operating the winch lever, its brake mechanism begins to act, preventing recoil and paralyzing the load.
  2. ASB system (Automatic Locking Security System)Zipper mechanism with safety pins. In the extreme case of cable breakage, the system would immediately block the tower section, preventing any movement of the load.

The construction of this elevator is carried out with the most advanced welding equipment that guarantees maximum safety and resistance, meeting at all times the requirements of solidity, maneuverability and lightness necessary for lifting loads.

ELC-735 lifting towers comply with safety requirements according to the following standards and regulations:

  • DGUV Regulation 17 & 18
  • DGUV Rule 115-002
  • DIN 56950-1
  • 2006/42/EC

VERY IMPORTANT: ELC TOWERS ARE NOT MANUFACTURED FOR LIFT OF PEOPLE.


BASE:

Compact steel base with Epoxy finish (double treatment), with 2 highly resistant wheels (Ø 100 mm) for comfortable handling and transport of the tower (trolley type).

Its four removable legs are equipped with double-pitch, high-speed leveling spindles, with non-slip discs for a perfect fit to all types of surfaces.


TELESCOPIC PROFILES:

The lifting tower is made up of 4 high-resistance steel profiles/sections finished in special Epoxy paint for outdoors. Its finish allows us to assemble the lifting tower outdoors, guaranteeing its good maintenance and avoiding rusting of its parts.

The sections are equipped with:
to) Oversized bushing welded on its terminal for greater reinforcement.
 b) Special adjustment system to avoid clearances between the sections (on all four sides).
c) Double pulley forwarding.
d) Protective plates to cover the pulleys; avoiding damage during handling and transport of the tower and preventing the cable from coming out of them.
e) The last section is provided with a reinforcement bushing with ergonomically designed metal knob.


LOAD LIFT:

The lifting of the load is carried out using a self-braking manual winch Ref. AL-KO 450 .
Once the desired height is reached, when you stop operating the winch lever, its brake mechanism begins to act, preventing recoil and paralyzing the load.

The sections are extended using sets of pulleys with bearings and galvanized steel cable (Composition: 7×19+0) specially designed for lifting loads (DIN 3060).

Note: The telescopic sections are fixed at the desired height using locking devices (essential during use).

The tower is provided with a spirit level to facilitate its vertical adjustment


TRANSPORT:

Its light and compact design allows for comfortable and easy handling to your workplace, and can be transported in any car.

DOWNLOADS:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)