PROEL S242S - 6.3 mm Stereo Angled Jack Connector with Gold-Plated Contacts
The Proel S242S is a professional audio connector designed for those who demand more than standard solutions and require absolute reliability in their connections. This 6.35 mm (1/4") male jack connector stands out for its stereo (TRS) configuration and 90-degree angled design, a perfect combination for optimizing space without sacrificing signal transmission quality. Manufactured by Proel, a leading Italian brand in the professional audio sector, this component is the ideal choice for sound engineers, musicians, and technicians who need to create high-performance custom cabling.
Its robust and durable construction features an all-metal housing with an elegant silver finish that protects the internal solder joints from impacts, stomping, and the usual wear and tear of stages and recording studios. The design incorporates a flexible, spring-type cable protector on the back, essential for relieving mechanical stress and preventing the cable from breaking right at the connector exit—one of the most common failures in instrument and patch cables.
The technical excellence of the S242S lies in its gold-plated contacts . This gold plating is not merely aesthetic; it guarantees superior conductivity and, most importantly, prevents long-term corrosion and oxidation. This ensures that your audio signal remains pure, free from unwanted noise, crackling, or frequency loss, even in humid environments or after years of heavy use. As a TRS (Tip-Ring-Sleeve) connector, it is versatile: it can be used for both stereo signals and balanced mono lines.
Main features
-
Right-angle design (90°): Allows you to connect equipment in tight spaces, close to the wall or inside compact pedalboards, reducing stress on the device's connection port.
-
Gold-plated contacts: Maximizes signal transfer and eliminates oxidation problems that degrade sound over time.
-
Rugged metal body: Solid casing that offers superior shielding and physical protection against plastic connectors.
-
TRS (Stereo/Balanced) Configuration: Suitable for headphones, insert cables, or professional audio balanced lines.
-
Spring strain relief: Protects cable integrity at the most critical bending point.
Product benefits
Using the Proel S242S connector brings immediate peace of mind to any audio setup. Its main benefit is space optimization ; its angled design prevents the cable from protruding excessively, protecting both the connector and the instrument or amplifier input from accidental bumps. Furthermore, the investment in gold-plated contacts results in complete sonic transparency , ensuring that the tone of your instrument or mix reaches its destination intact. It's a component that elevates the standard of any DIY cable to a professional boutique level.
Use cases
-
Guitar and bass pedalboards: Ideal for interconnecting pedals where space is limited and a low profile is needed.
-
Headphone repair: Perfect for replacing broken connectors on high-end studio headphones.
-
Studio racks and synthesizers: Facilitates connection at the rear of equipment built into furniture or racks where there is no room for straight connectors.
-
Insert cables and Y-cables: Thanks to their TRS configuration, they allow the manufacture of special cables for mixing consoles.
-
Active instruments or keyboards: For stereo or balanced outputs on stages.
Frequently Asked Questions
Does this connector work for mono cables?
Yes, although it's a stereo (TRS) connector, it can be soldered to function as a mono (TS) connector by joining the ring to the sleeve, or simply by ignoring the ring. However, for standard guitar cables, the mono version is usually recommended. Its ideal use in mono is for balanced signals.
What cable diameter does it support?
The flexible spring is designed to accommodate standard instrument and microphone audio cables, typically with an outer diameter of between 6mm and 7mm, providing a secure fit.
Is welding necessary for installation?
Yes, the Proel S242S is an aerial mount connector that requires tin soldering to secure the cable conductors to the internal terminals.
Project description
Male aerial connector, 6.35 mm (1/4") stereo (TRS) jack, with a 90-degree angled form factor. Constructed with a metal outer housing in a nickel/silver finish and gold-plated internal contacts and stem for low contact resistance and corrosion prevention. Includes an integrated flexible metal spring strain relief system on the back for cable protection. Designed for conductor soldering, compatible with balanced and stereo audio signals.
