IK Multimedia iRig Pre 2 - Portable XLR Preamp/Interface with +48V for iPhone/iPad, Android, and Cameras (Direct Monitoring)

IK Multimedia iRig Pre 2 - Portable XLR Preamp/Interface with +48V for iPhone/iPad, Android, and Cameras (Direct Monitoring)

The iRig Pre 2 is a microphone preamp with analog output that lets you use any XLR microphone (dynamic, condenser, or ribbon) with your iPhone/iPad , Android device , or DSLR/CSC camera . It features true +48V phantom power (from 2 AA batteries), gain control , a headphone output with direct monitoring , and a built-in 40cm 3.5mm TRRS cable with auto-detection for mobile and camera inputs. Its electronics offer a 48dB gain range , low noise ( EIN down to −113.5 dBA ), and 0.003% THD+N , with a 50Hz–20kHz response. It's a rugged, pocket-sized solution for podcasting , interviews, streaming , reporting, and video.

Main features

• XLR input for dynamic, condenser or ribbon microphones.
• Phantom +48 V real from 2 × AA (≈ 7 h use with phantom / ≈ 20 h without phantom).
• 3.5mm auto-detect output (TRRS/camera input) via a 40cm fixed cable; compatible with smartphones and DSLRs/CSCs.
• Direct monitoring via 3.5mm headphones with dedicated volume control.
• Gain range 48 dB , EIN up to −113.5 dBA , THD+N 0.003 % ; response 50 Hz–20 kHz .
• Pocket-sized “soft-touch” chassis with Velcro for attachment to microphone stands or camera rigs.
• Plug & play with audio/video apps on iOS/Android and camera microphone inputs.

Product benefits

• Consistent quality with your favorite XLR mic and true phantom power for demanding capsules.
• Secure workflow : Adjust gain by viewing/listening levels and monitor in real time with no latency.
• Total versatility : a single cable works for mobile or camera thanks to the auto-detection output.
• True mobility : Battery-powered for hours outdoors; minimal size and weight in your backpack or rig .

Use cases

• Podcast and interview on the go with XLR microphones and headphone monitoring.
• Video and reportage by connecting the XLR microphone to the camera's mic input to drastically improve the audio.
• Streaming and online classes from mobile or tablet with fine-tuned level control.

Frequently Asked Questions

Does it need special apps or drivers? No. It connects via 3.5mm to your phone or camera's microphone input and works with your usual apps.
Can I use ribbon mics? Yes. Disable the +48V phantom power for ribbon and dynamic mics.
What's the battery life? Approximately 20 hours without phantom power and 7 hours with phantom power activated (using AA alkaline batteries).

Description for projects

Mobile XLR microphone preamp/interface with 3.5 mm analog output (auto-detection of TRRS/camera input); 40 cm fixed cable; +48 V phantom power (max. 6 mA); gain range 48 dB; EIN −113.5 dBA (minimum gain) / −92.4 dBA (maximum gain); THD+N 0.003 % (−90 dBA); response 50 Hz–20 kHz; direct monitoring via 3.5 mm headphones with volume control; power supply: 2 × AA; battery life approx. 20 h (without phantom power) / 7 h (with phantom power). Includes 2 AA batteries and Velcro strap.