Gator GTOUR10X16PU - 19" 10U + 16U flight case rack with pop-up system and wheels
The Gator GTOUR10X16PU is a professional G-TOUR series flight case rack, designed as a 19" mobile audio console with 10U on top and 16U on the bottom . It's designed to house mixers, control surfaces, and processors in the upper section, while the lower section offers space for power amplifiers, processors, interfaces, or patchbays, making it a true portable control center for touring, rentals, and mobile setups.
Its structure is based on 9mm plywood with a high-strength black laminate exterior , combined with commercial-grade metal fittings and reinforced, stackable ball corner pieces . The front and rear rails are made of approximately 3.2mm thick steel, threaded and designed to support heavy equipment without deformation. All of this results in a robust construction, suitable for intensive road use and demanding professional applications.
The upper 10U rack incorporates a ratchet-style pop-up system that allows equipment to be transported flat and, once on stage, raised to different angles to improve visibility and access to controls. This is especially useful for mixing consoles, digital controllers, or processors that require a direct view of the display and knobs. The lower section offers 16U of front and rear rack space , with a rack depth of approximately 51.4 cm , ideal for amplifiers, wireless systems, dynamics processors, audio matrices, and other 19" equipment.
The flight case closes with a tongue-and-groove aluminum flange and a lid with a rubber gasket , improving the fit and providing additional protection against dust and moderate splashes. It includes eight recessed red rotating butterfly latches and four recessed spring-loaded handles with rubber grips (two per side), facilitating manual loading onto the stage, into a truck, or into a van.
For mobility, the GTOUR10X16PU is equipped with four 4" (≈10.2 cm) industrial casters , two of which have brakes , allowing the rack to be locked in place during use. This makes it easy to move the unit backstage, through loading docks, and down walkways, even when fully loaded.
The approximate interior dimensions of the body are 41.3 x 48.3 x 71.1 cm (depth x width x height), equivalent to 16.25" x 19.0" x 28.0" , while the exterior dimensions are around 65.4 x 54.0 x 105.4 cm (25.75" x 21.25" x 41.5"). The weight of the case is around 55.8 kg , consistent with a 9 mm wooden construction, reinforced hardware, and industrial wheels.
Thanks to its design as a 19" console rack with a tiltable top section and large lower capacity, the Gator GTOUR10X16PU is a very complete option for mobile FOH systems , monitor racks, audio solutions for churches, theaters, rental companies, mobile studios and any environment where it is necessary to carry a complex audio setup safely and comfortably.
Main features
-
High-performance 19" flightcase rack: Mobile audio console with standard 19" format and 10U upper + 16U lower distribution.
-
Pop-up system in the upper rack: the 10U section is transported in a flat position and raised by means of a ratchet system to different working angles.
-
Lower 16U capacity: lower section with 16U front and rear rails for amplifiers, effects racks, processors, wireless systems and other equipment.
-
9mm plywood construction: 9mm wood frame with heavy-duty black laminate exterior for heavy-duty road use.
-
3.2mm rack rails: Front and rear steel rails approximately 3.2mm thick, threaded and prepared for heavy loads.
-
Tongue and groove aluminum flange: tongue & groove type aluminum profiles that ensure a firm and precise closure between lid and body.
-
Lid with rubber gasket: improves the rack's seal against dust and moderate splashes (not submersible).
-
Recessed closures: 8 recessed red twist latches, resistant and easy to operate.
-
Spring-loaded handles: 4 recessed handles with springs and rubber grips (2 per side) that make it easier to grip and reduce the effort when lifting.
-
Reinforced ball corners: stackable metal corners that protect the structure and facilitate stacking with other flight cases.
-
4" (≈10.2 cm) industrial wheels: 4 large wheels, 2 of which have brakes, for smooth and safe transport.
-
Approximate interior dimensions: 41.3 x 48.3 x 71.1 cm (depth x width x height).
-
Approximate external dimensions: 65.4 x 54.0 x 105.4 cm (depth x width x height).
-
Rackable depth to back cover: approximately 51.4 cm.
-
Approximate weight of the empty case: around 55.8 kg.
-
ATA Approval: Design accepted for use according to ATA standards, suitable for touring and professional transport.
Product benefits
-
A single rack for the entire system: it allows the mixing console or control surface (top) and the processing and amplification (bottom) to be integrated into a single flight case, simplifying logistics and cabling.
-
Live ergonomics: the top rack's pop-up system places the mixer or controller in a tilted and comfortable position to use, improving the visibility of screens and controls in stage conditions.
-
Maximum space utilization: the lower 16U with front and rear rails facilitate the orderly assembly of equipment and its cabling, including stages, processors, audio routers, patchbays, power units, etc.
-
Robust protection for touring: the combination of 9mm plywood, outer laminate, reinforced corner pieces and commercial-grade hardware protects equipment from shocks, vibrations and stacking during transport.
-
Optimized mobility: 4" industrial wheels allow the rack to be moved easily even with a loaded assembly; brakes on two wheels ensure that the flight case remains fixed on the stage or at FOH.
-
Faster installation and removal: by centralizing the system in a single rack, assembly time, the number of loose cables, and potential points of failure are reduced.
-
Professional image in any environment: the black laminate finish, recessed hardware and touring-type construction project a polished and solid appearance to clients, artists and the public.
Use cases
-
Mobile FOH systems: PA mixing and processing setup for tours, festivals and traveling events, with a console in the top rack and processors/amplifiers at the bottom.
-
Stage monitor racks: combination of monitor mixer at the top and amplification or in-ear systems in the lower rack.
-
Churches, theaters and auditoriums: central rack solution for rooms that need a transportable audio system within the venue itself or between rooms.
-
Sound rental companies: standard rack for modular configurations that adapt to different riders, with easy transport and professional protection.
-
Mobile studios and broadcast: integration of mixing console, audio interfaces, processors and communication systems for mobile recording or streaming units.
-
Corporate events and AV production: compact rack for complete audio solutions at conferences, presentations, trade fairs and corporate events.
Frequently Asked Questions
What does 10U up and 16U down mean?
The upper section offers 10 rack units (10U) in a slanted format, ideal for a mixing console, controller, or main processor. The lower section has 16U with front and rear rails, so you can mount 19" equipment at either the front or rear (for example, power amplifiers at the front and patchbays or connection points at the rear).
What is the usable rack depth for the equipment?
The rack depth to the rear panel is approximately 51.4 cm . This allows for the mounting of most standard rack amplifiers and processors. It is recommended to check the depth of each piece of equipment (including rear connectors) before installation.
Can it be used as a flight case for touring and for truck transport?
Yes. The GTOUR10X16PU is designed as an ATA-style road rack , with 9mm plywood, reinforced hardware, and stackable ball corners. It is suitable for touring and professional transport, provided standard loading and stowage practices are followed.
What type of wheels does it include?
It includes four 4" (≈10.2 cm) industrial casters , two of which have brakes . The casters are sized to support the weight of the loaded rack and provide stable movement on common backstage and stage surfaces.
Is it waterproof?
The rack features a lid with a rubber seal , which improves protection against dust and moderate splashes. However, it is not a waterproof or submersible case, so exposure to prolonged heavy rain or constant extreme humidity is not recommended.
Does it have a built-in key lock?
The latches are recessed, rotating butterfly latches and do not include a factory-installed key lock. External security solutions can be added if deemed necessary, depending on the intended use.
Configuration and assembly recommendations
- Plan the equipment layout to take advantage of the top 10U for the mixing console or main control unit.
- Reserve the lower 16U for amplification, signal processors, matrices, routers, wireless systems, and power distribution.
- Use quality rack bolts and nuts and tighten firmly, but not excessively, to avoid damaging the rails.
- Secure rear connections with cable ties or cable guides to avoid stress on connectors during transport.
- Lock the wheels with the brake during use to prevent unintentional movement on stage.
Maintenance and care
- Clean the exterior with a soft, slightly damp cloth, avoiding abrasive products or harsh solvents.
- Periodically check the condition of the wheels, locks, handles and corner pieces, tightening the screws if necessary.
- Check the rubber gasket on the lid to ensure a good seal over time.
- Do not store the rack in environments with extreme humidity or prolonged direct sunlight to preserve the laminate and hardware.
Project description
Gator GTOUR10X16PU professional flight case for 19" equipment, constructed with 9mm plywood and a black laminate exterior. Mobile console configuration with a 10U tiltable top rack (ratchet pop-up system) and a 16U bottom rack with approximately 3.2mm steel front and rear rails. Includes tongue-and-groove aluminum flange, lid with rubber gasket, 8 recessed butterfly latches, 4 spring-loaded recessed handles, and 4" industrial casters (2 with brakes). Approximate interior dimensions: 41.3 x 48.3 x 71.1 cm (depth x width x height). Approximate exterior dimensions: 65.4 x 54.0 x 105.4 cm. Rack depth to rear lid: approximately 51.4 cm. Approximate weight: 55.8 kg.
