Gator GRC10X8PU - 19" combo rack with 10U pop-up top and 8U front
The Gator GRC10X8PU is a 19" combo flight case rack designed for mobile sound reinforcement and professional use. It combines a pop-up 10U top rack for mixing consoles or processors with an 8U front-mounted bottom rack for power amplifiers, routers, processors, or effects units. Constructed from high-density molded polyethylene (HDPE) of ATA type, it offers robust protection for touring, events, and rental applications, while maintaining a low weight and excellent resistance to impacts, stacking, and frequent transport.
The 10U upper section utilizes Gator's ratcheting pop-up system: during transport, the top tray remains flat, protected by the lid; once on stage, it can be raised and locked at various working angles, providing an ergonomic position for the mixer or other equipment mounted in that area. The lower section offers 8U of standard 19" rack space with front and rear threaded rails, facilitating the tidy mounting of power amplifiers, processors, patchbays, or power supplies while maintaining clean and accessible cabling.
With approximate interior dimensions of 52.7 x 48.3 x 35.6 cm (length x width x height) and a usable rack depth of around 59.1 cm to the rear panel, the GRC10X8PU offers ample space for most 19" form factor equipment, including deep drives such as modern power amplifiers. The exterior dimensions are approximately 64.8 x 57.2 x 59.7 cm, and it weighs around 14.5 kg, providing a good balance of load capacity, stability, and portability.
The flight case features two molded, ergonomic side handles for easy loading between vehicle, storage, and stage. The black plastic shell includes a lid gasket for enhanced splash and dust resistance, while metal twist/butterfly latches ensure a secure closure of all three lids (top, front, and bottom). Additionally, the design is compatible with Gator's optional wheel kits, allowing the rack to be converted into a rolling solution for heavier setups or longer transport distances.
Main features
-
Professional 19" combo rack: Mobile audio console rack with pop-up 10U top section and front 8U bottom section, for a total of 18U of mounting space.
-
ATA construction in high-density polyethylene: molded shell in high-impact PE, resistant to shocks, stacking and the usual wear and tear of touring and rental.
-
Pop-up top rack with ratchet system: The 10U top tray is transported in a flat position and can be raised to different working angles using a rack and pinion system.
-
8U lower rack with front and rear rails: mounting space for processors, stages or 19" drives with solid fixing and possibility of mounting also from the rear.
-
Standard 19" format": compatible with most 19" professional audio equipment (approximate width 48.3 cm).
-
Approximate interior dimensions: 52.7 x 48.3 x 35.6 cm (length x width x height).
-
Usable rack depth: approx. 59.1 cm to the rear cover, ideal for deep equipment.
-
Approximate external dimensions: 64.8 x 57.2 x 59.7 cm.
-
Approximate weight: 14.5 kg.
-
Integrated side handles: two molded, slightly angled carrying handles designed for a comfortable and secure grip between two people.
-
Twist/butterfly metal latches: robust closures on all three lids for independent access to the top, front and bottom.
-
Splash resistance: seal on the lid helps protect the interior from dust and light moisture (not watertight or submersible).
-
Optional wheel compatibility: can be equipped with Gator bolt-on wheel kits to improve mobility on heavy assemblies.
-
Color: black, professional and discreet finish.
Product benefits
-
The entire system in a single rack: the combination of 10U on top and 8U on the bottom allows you to mount a mixer, processors, stages and power distribution in a single easily transportable unit.
-
Cleaner assembly and wiring: Front and rear rails facilitate tidy assembly and the use of trays, strips and patchbays, reducing assembly and disassembly time.
-
Live ergonomics: the pop-up top tray system positions the mixer or controller at a comfortable angle for working during concerts, events, or DJ sessions.
-
Advanced equipment protection: The high-density polyethylene casing and ATA-type structure offer far superior protection to a standard wooden rack, especially against shocks during transport.
-
Long service life: molded plastic materials withstand ambient humidity, temperature changes and intensive handling well, making them suitable for rental and touring companies.
-
Scalability: The 19" format and 18U total allow you to rearrange your equipment set over time without changing racks, simply by reconfiguring the mounted units.
-
Professional image: the black finish, independent lids and compact design provide a neat and solid look on stages, event rooms and corporate setups.
Use cases
-
Mobile PA equipment: mixing console assembly on top and stages, signal processors and electrical distribution at the bottom for bands, orchestras and live sound companies.
-
Mobile installations: cultural centers, multipurpose halls, churches or town halls that need a complete and easily transportable sound system.
-
Sound and lighting rental companies: a robust solution for pre-configured audio packages that are regularly used at events.
-
Corporate event production: compact rack for congresses, presentations and conferences where audio mixing, processing and sending to reinforcement systems are combined.
-
Mobile studios and recording units: integration of preamps, interfaces, processors and control console in a single unit designed for frequent travel.
Frequently Asked Questions
What size equipment does the Gator GRC10X8PU rack support?
The rack accommodates standard 19" wide equipment. The approximate interior dimensions are 52.7 cm long, 48.3 cm wide, and 35.6 cm high, with a usable rack depth of approximately 59.1 cm to the rear panel. It is important to verify the depth of the equipment (including connectors) before mounting it.
Is the pop-up top rack fixed or adjustable?
The top rack uses a "pop-up" ratchet system, which allows the tray to be transported in a flat position and then raised to different angles, fixing it at the most convenient point to operate the mixing console or other equipment mounted above.
Does it have rear rails on the bottom?
Yes, the GRC10X8PU features front and rear threaded rails on the lower 8U section, facilitating more secure mounting of stages and processors, as well as cable management at the rear.
Does it include wheels as standard?
The GRC10X8PU model does not include factory-integrated wheels, but it is compatible with Gator-specific optional wheel kits that can be installed to improve the mobility of the unit when the load is heavy.
Is it water resistant?
The rack offers resistance to splashes and dust thanks to the gasket on the lid and the tight fit of the covers, but it is not a watertight rack. It should not be exposed to prolonged heavy rain or immersion in water.
Compatibility and assembly recommendations
To get the most out of the Gator GRC10X8PU, it's recommended to plan the equipment layout in a balanced way: place the heaviest units (power amplifiers, power supplies) in the lower positions of the front 8U racks and reserve the pop-up top for mixers, controllers, or processors that require constant access. The threaded rails allow the use of Gator-specific screws or screws compatible with their thread pitch; it's advisable to complete the installation with appropriate nuts and washers to avoid damaging the plastic material of the rail.
It is also advisable to leave space at the rear for ventilation of stages and processors, using either solid or ventilated panels if necessary. In touring or intensive rental applications, combining the GRC10X8PU with a wheel kit and additional protective rails facilitates the movement of the loaded rack and reduces the effort required by technical personnel.
Project description
Gator GRC10X8PU 19" combo rack, constructed of high-density molded polyethylene (HDPE) ATA type, with a 10U pop-up top rack via a ratchet system and an 8U front bottom rack with threaded front and rear rails. Total capacity 18U in standard 19" format. Approximate interior dimensions: 52.7 x 48.3 x 35.6 cm (L x W x H). Usable rack depth to rear lid: approx. 59.1 cm. Approximate exterior dimensions: 64.8 x 57.2 x 59.7 cm. Approximate weight: 14.5 kg. Black plastic housing with two integrated side handles, metal twist/butterfly latches, and lid gaskets for splash resistance. Compatible with optional Gator wheel kits.
