Gator GR-STUDIO-12U - 12U studio rack cabinet for 19" equipment
The Gator GR-STUDIO-12U is a 12U studio rack cabinet for standard 19" equipment, designed to organize and protect processors, interfaces, preamps, compressors, and other outboard gear in home studios, professional studios, or rehearsal rooms. Its furniture-grade MDF construction with a black oak laminate finish combines robustness with a refined aesthetic that complements modern studio furnishings.
This rack cabinet offers 12U of usable height , with approximate interior dimensions of 48.3 cm wide x 53.3 cm high x 39 cm deep , based on the standard metric of 19" wide, 21" high, and 15.5" deep. This allows for the installation of a complete processing chain: audio interfaces, microphone preamps, compressors, equalizers, effects units, audio routers, or even amplifier profilers and modeling units.
The frame is constructed from 5/8" thick (approximately 15.9 mm ) furniture-grade MDF, covered with a durable and easy-to-clean black oak laminate. The front rack rails are constructed from 3.2 mm cold-rolled steel , providing a solid support even for heavy drives. The unit supports a load of approximately 200 lbs (about 90 kg ), sufficient for most studio setups.
Externally, the GR-STUDIO-12U measures approximately 52.1 cm wide x 55.9 cm high x 41.9 cm deep , and weighs around 13.6 kg . It's compact enough to fit under a table, next to a production desk, or under a keyboard controller, yet robust enough to withstand years of setups and reconfigurations. Because it's a stand without wheels , it provides a stable and secure base on the floor or other studio structures.
Thanks to its combination of 12U capacity, usable depth of around 39 cm and cabinet-like design , the Gator GR-STUDIO-12U is a very practical solution for those who want to keep their outboard gear tidy, accessible and visually integrated into the studio environment, without resorting to bulky flight cases.
Main features
-
Studio rack cabinet 19": studio rack cabinet for standard 19" equipment, with 12U height .
-
Furniture-grade MDF construction: 5/8" (≈ 15.9 mm) MDF panels with furniture-grade black oak laminate.
-
Heavy-duty steel rails: Rack rails constructed from 3.2 mm cold-rolled steel , designed to support heavy equipment.
-
Approximate interior dimensions (width x height x depth): 48.3 x 53.3 x 39 cm (equivalent to 19" x 21" x 15.5").
-
Approximate exterior dimensions (width x height x depth): 52.1 x 55.9 x 41.9 cm (20.5" x 22" x 16.5").
-
Usable height: 12U for studio rack units, processors, interfaces, etc.
-
Approximate load capacity: up to about 90 kg of equipment (equivalent to 200 lb), according to distributor data.
-
Black oak finish: elegant and professional look that matches other studio furniture.
-
Furniture without wheels: stable base for fixed or semi-permanent installation in studios and control rooms.
-
Color: black / black oak.
Product benefits
-
Professional studio organization: concentrates up to 12U of 19" equipment in a single piece of furniture, keeping the installation clean, tidy and easy to manage.
-
Aesthetic integration with the rest of the furniture: the furniture-grade black oak finish integrates better into home and professional studios than a metal rack or a road flight case.
-
Supports heavy equipment safely: 3.2mm steel rails and thick MDF construction allow heavy units to be mounted with complete confidence.
-
Space saving: the 12U vertical format and the usable depth of about 39 cm optimize space in small rooms, home studios or control booths.
-
Quick access to the outboard: with all the equipment grouped in the same cabinet, access to controls, front connections and settings is direct and convenient.
-
Flexibility for future expansions: the 12U allows you to start with a basic configuration and add processors, interfaces or effects without changing the cabinet.
Use cases
-
Home studios and project studios: orderly setup of interfaces, microphone preamps, compressors, equalizers and multi-effects processors.
-
Professional studios: dedicated rack for dynamics and color outboard, stereo processors, converters and monitoring systems.
-
Rehearsal rooms and practice rooms: centralization of processors, signal routers, monitoring systems and PA processors in a single fixed cabinet.
-
Audiovisual and broadcast installations: integration of audio processing, interfaces and control equipment in production or technical control rooms.
-
Post-production and sound for video: rack for preamps, converters, monitoring systems and special studio processors.
Frequently Asked Questions
What is the useful depth of the Gator GR-STUDIO-12U?
The usable depth is approximately 39 cm (15.5"), a suitable size for most standard-format interfaces, preamps, compressors, and studio processors. It is recommended to check the depth of each unit (including rear connectors) before mounting.
Is it compatible with any 19" device?
Yes, it's designed for standard 19" racks with heights of 1U, 2U, 3U, etc., up to a total of 12U. As long as the rack is 19" in size and has a suitable depth, it can be mounted without problems using standard rack hardware.
Does it include rack screws?
This type of cabinet is usually delivered without screws or with a limited quantity. The most practical solution is to have a set of 19" rack screws and nuts compatible with threaded steel rails to mount all the necessary equipment.
Does it have wheels or is it a fixed piece of furniture?
The GR-STUDIO-12U is a rack unit without wheels , designed for fixed or semi-permanent installation. If frequent mobility is required, it can be placed on a wheeled platform or combined with other mobile studio equipment.
Can another piece of equipment be placed on top of the cabinet?
The 5/8" MDF construction provides a stable top surface. It's common to place small monitors, patch panels, lightweight drives, or even a small controller on the rack, always respecting the maximum reasonable load and distributing the weight evenly.
Usage and assembly recommendations
- Plan the distribution of the 12U leaving the most used control units (interfaces, preamps, controllers, etc.) at the top.
- Place the heaviest equipment at the bottom to improve the stability of the assembly.
- Use quality screws and tighten without overtightening to avoid damaging the steel rails.
- Organize the rear wiring with cable ties or cable guides to avoid stress on the connectors during future reconfigurations.
- Place the furniture in a ventilated area, leaving enough space at the back for air circulation and access to connections.
Maintenance and care
- Clean the black oak finish with a soft, slightly damp cloth and non-abrasive products.
- Avoid direct impacts on corners or rails to preserve rack alignment.
- Do not expose the furniture to excessive humidity or direct heat sources to avoid deformation of the MDF.
- Periodically check the tightness of the screws on the equipment and the rack itself to ensure stability.
Project description
Gator GR-STUDIO-12U studio rack cabinet for 19" equipment, with a 12U capacity. Constructed of 5/8" (≈ 15.9 mm) furniture-grade MDF with a black oak laminate finish. Front rack rails made of 3.2 mm cold-rolled steel. Approximate interior dimensions: 48.3 cm (W) x 53.3 cm (H) x 39 cm (D). Approximate exterior dimensions: 52.1 cm (W) x 55.9 cm (H) x 41.9 cm (D). Approximate weight: 13.6 kg. Estimated load capacity: up to approximately 90 kg of equipment.
