PD-Connex CX06-0.50 - Hybrid DMX and Power Connector Cable 0.5m
The PD-Connex CX06-0.50 is a professional cabling solution designed to optimize and simplify the connection of lighting equipment. This hybrid cable, also known as a combi cable, integrates both the DMX signal line and the power line into a single, robust cable, eliminating the need for two separate cables. At 0.50 meters long, it is the perfect choice for bridging and daisy-chaining between nearby equipment, such as moving heads, LED PAR lights, or effect bars mounted on a truss or stand.
Its clever design not only reduces visual clutter and potential tangles, but also dramatically speeds up setup and teardown times at events, tours, or permanent installations. On one end, it features a 3-pin female XLR connector for DMX signal input and a Type A Powerconnector for power input. On the other end, it has a 3-pin male XLR connector and a Type B Powerconnector for output, allowing for clean and safe power and control of the next device in the chain.
Main features
-
2-in-1 solution: Combines a DMX signal line and a power cable in a single cover, simplifying wiring as much as possible.
-
Professional Connectors: Equipped with Powerconnector A (input) and B (output) connectors for safe and stable power supply, and 3-pin XLR connectors for DMX signal transmission.
-
High Electrical Capacity: The power cable has a cross-section of 3x1.5mm², capable of supporting a maximum current of 16 amps, suitable for the most demanding lighting equipment.
-
Reliable Signal Transmission: The signal cable has an impedance of 120 ohms, complying with the DMX512 standard, and high-density shielding to protect the signal from electromagnetic interference.
-
Robust and Flexible Design: Built to withstand the demands of professional use on tours and events, with a tough and flexible outer cover that makes it easy to handle.
-
Optimal Length for Bridging: Its 50 centimeters are ideal for connecting adjacent equipment without excess cable, maintaining a tidy and professional installation.
Benefits for the professional
Using the PD-Connex CX06-0.50 cable results in greater efficiency and a more professional look. By halving the number of cables required, it minimizes the risk of tripping hazards and disconnections. The Powerconnector system offers superior anchoring compared to conventional IEC connectors, preventing accidental disconnections due to vibration or pulling. For lighting technicians, rental companies, and event organizers, this cable is an indispensable tool that ensures faster, safer setups with a flawless finish.
Use cases
This cable is the perfect solution for daisy-chaining multiple lighting effects. It's ideal for interconnecting moving heads, PAR lights, LED bars, and other DMX-controlled devices mounted on the same structure, such as a stage truss, a lighting bridge in a theater, or a bar in a nightclub. Its short length makes it especially useful for maintaining visual and functional order in equipment racks or compact lighting setups.
Frequently Asked Questions
What is the difference between Powerconnector A and B?
Powerconnector A (usually blue) is designed as the power input connector. Powerconnector B (usually gray) is the power output connector. This color and shape coding prevents incorrect connections and ensures circuit safety.
Can I use this cable for 5-pin DMX equipment?
No, this cable is equipped with 3-pin XLR connectors. For equipment requiring a 5-pin DMX connection, you will need a specific cable or adapter.
What is the maximum current that the power cable can handle?
The power cable has a cross-section of 3x1.5mm² and is designed to withstand a maximum load of 16 amps.
Is the 120 ohm impedance important?
Yes, it's crucial. The DMX512 protocol specifies that the cable must have an impedance of 120 ohms to ensure stable, error-free data transmission. Using cables with a different impedance (such as microphone cables) can cause problems controlling the lights.
Project description
This 0.50-meter combination cable integrates a power line and a DMX signal line. The power section consists of three 1.5mm² conductors with Powerconnector Type A (input) and Type B (output) connectors, rated at 16A. The signal line is a balanced DMX cable with a characteristic impedance of 120 ohms, terminated with 3-pin XLR connectors (male and female). The cable's outer diameter is 10.8mm, and it features 64x0.08mm braided copper shielding to protect the signal.
