Ibiza Light & Sound AMP800-MKII – 2x600W MOSFET PA amplifier in 19″ 2U rack
The Ibiza Light & Sound AMP800-MKII is a professional stereo amplifier in a 19″ (2 U) rack format with integrated handles, based on MOSFET technology to offer power and reliability. It delivers up to 2×600 W at 4 Ω (2×400 W at 8 Ω), with a frequency response of 20 Hz – 20 kHz, total harmonic distortion less than 1%, signal-to-noise ratio greater than 89 dB and channel separation of 54 dB. It incorporates soft-start, low-noise fan cooling, built-in volume potentiometers, and electronic protections against short circuits, overloads, DC offset and overtemperature.
Main features
- Peak power: 2×600 W @ 4 Ω / 2×400 W @ 8 Ω
- Frequency response: 20 Hz – 20 kHz
- THD @ 1 kHz: < 1 %
- S/N ratio: > 89 dB; channel separation: 54 dB
- Inputs: RCA and 6.35 mm jack (level 850 mV, impedance 20 kΩ)
- Outputs: Speakon NL4 and speaker terminals (impedance 4 – 8 Ω)
- Recessed controls: point potentiometers for precise adjustment
- Cooling: thermally controlled fans
- Protections: against short circuits, overload, DC offset and overtemperature
- Soft-start: progressive start to avoid voltage peaks
- Monitoring: Independent LED VU meters per channel
- Rack format: 482×88×300 mm (2 U); weight approx. 6.5kg
Product benefits
-
Power and clarity: high headroom for high-demand PA systems.
-
Continuous reliability: MOSFET technology and advanced protections for intensive use.
-
Professional installation: 2U chassis with handles makes assembly and transport easy.
-
Precise control: Built-in potentiometers and VU meters for quick adjustments.
-
Safe operation: soft-start and optimized ventilation extend the service life.
Use cases
- Sound systems in concert halls, auditoriums and theaters.
- PA reinforcement for DJs and outdoor events.
- Fixed installations in clubs, bars and convention centers.
- Audiovisual projects and recording studios that require robust amplification.
Frequently Asked Questions
-
Can I connect speakers with different impedances? Yes; each channel accepts 4 Ω to 8 Ω.
-
How do I prevent overheating? Leave plenty of space in the rack and make sure the fans are not obstructed.
-
Which Speakon cable should I use? We recommend a cable with a cross-section of ≥ 2.5 mm² and NL4 Speakon connectors.
Description for projects
MOSFET stereo amplifier 2 U rack 19″, 2×600 W @ 4 Ω (2×400 W @ 8 Ω), 20 Hz – 20 kHz, THD < 1 %, RCA/jack inputs, Speakon/terminal outputs, soft-start, fans, protections, LED VU-meters, 482×88×300 mm, 6.5 kg.
