Ibiza Light & Sound AMP600-MKII – 2x480W MOSFET PA amplifier in 19″ 2U rack
The Ibiza Light & Sound AMP600-MKII is a professional stereo amplifier in a 2U 19" rack format, designed for PA systems that demand power, reliability, and clean sound. Based on MOSFET technology, it delivers up to 2x480 W at 4 Ω (2x320 W at 8 Ω), with total distortion less than 1% and a 20 Hz–20 kHz response. Its metal chassis incorporates recessed potentiometers, low-noise fans with thermal control, soft-start, and protections against short circuits, overloads, DC offset, and overtemperature. Ideal for touring, concert halls, auditoriums, and any fixed or mobile installation.
Main features
-
Peak power: 2×480 W @ 4 Ω / 2×320 W @ 8 Ω
-
Frequency response: 20 Hz – 20 kHz
-
THD @ 1 kHz: < 1 %
-
S/N ratio: > 89 dB
-
Channel separation: 54 dB
-
Inputs: RCA and 6.35 mm jack (level 850 mV, impedance 20 kΩ)
-
Outputs: Speakon NL4 and terminals, supports 4–8 Ω
-
Controls: Recessed volume with dot potentiometers
-
Cooling: thermally controlled fans
-
Protections: short circuits, overload, DC offset, overtemperature
-
Soft-start: progressive start to avoid voltage peaks
-
Monitoring: Independent LED VU meters per channel
-
Dimensions: 482 × 88 × 300 mm (19″ × 2 U)
-
Weight: 5.85 kg
Benefits
-
Stable Power: MOSFET technology for high current delivery and low noise.
-
Continuous reliability: Advanced protections ensure uninterrupted operation.
-
Professional installation: 2U rack format with handles makes assembly and transport easy.
-
Precise control: built-in potentiometers and LED VU meters for on-the-fly adjustments.
-
Soft-start: soft-start protects the electrical network and prolongs the life of the equipment.
Use cases
- PA systems in concert halls, auditoriums and theaters.
- Sound reinforcement for DJs and mobile events.
- Fixed installations in bars, clubs and convention centers.
- Sound support in audiovisual productions and recording studios.
Frequently Asked Questions
-
Can it work with 4 Ω and 8 Ω speakers? Yes; each channel supports both impedances.
-
How do you prevent overheating? Maintain clear ventilation and clean the fans regularly.
-
Which Speakon cable should I use? We recommend a cable with a cross-section of ≥ 2.5 mm² and a standard NL4 Speakon connector.
Description for projects
MOSFET stereo amplifier 2 U rack 19″, 2×480 W @ 4 Ω (2×320 W @ 8 Ω), 20 Hz–20 kHz, THD < 1 %, RCA/jack inputs, Speakon/terminal outputs, forced ventilation, soft-start, protections, LED VU-meters, 482×88×300 mm, 5.85 kg.
