OSRAM AirZing PRO 5030 - 30W UV-C Luminaire with IR Sensor for Air and Surface Disinfection (253.7 nm)
The OSRAM AirZing PRO 5030 is a UV-C germicidal luminaire for wall or ceiling mounting, designed to deactivate microorganisms in the air and on surfaces in unoccupied indoor spaces. It integrates a 30W PURITEC® HNS® T8 lamp with 253.7 nm emission (ozone-free), an infrared presence sensor that switches off the unit upon detecting the entry of people or animals, and a 30-second start-up delay for enhanced safety. With a UV-C output of 11–12W and a reference irradiance of >1.2W/m² @ 1m (initial) and >0.96W/m² @ 1m at 9,000 h, it allows for controlled dose adjustment (irradiance × time) based on height, distance, and shadows.
It operates at 220 V ±10% (50/60 Hz) with a system power of approximately 34 W , THD < 20% , and a power factor ≥ 0.9 . Its dimensions of 1058 × 54 × 78 mm and weight of approximately 1.3 kg facilitate installation at heights of 2.5–4 m . It is not for general lighting; it is intended for programmed cycles without occupancy , with appropriate signaling and access control.
Main features
-
UV-C source: OSRAM PURITEC® HNS® T8 30 W (G13), 253.7 nm, ozone free.
-
UV-C flux: 11–12 W; reference irradiance: >1.2 W/m² @1 m (initial) and >0.96 W/m² @1 m 9,000 h.
-
Integrated safety: IR presence sensor (immediate shutdown) and 30s power-on delay; manual restart after detection.
-
Input: 220 V ±10%, 50/60 Hz; system power: ≈ 34 W; THD: <20%; PF: ≥ 0.9; Lamp current: 360 mA.
-
Construction: 1058 × 54 × 78 mm; ≈ 1.3 kg; for indoor use.
-
Recommended height: 2.5–4 m; wall or ceiling mounting (brackets included).
-
Lamp life: 9,000 h.
Product benefits
-
Chemical-free disinfection of air and surfaces: UV-C radiation at 253.7 nm alters DNA/RNA and prevents microbial replication.
-
Safe and controlled operation thanks to the IR sensor, the power-on delay and the need for manual restart after detection.
-
Reproducible results with specified flux and irradiance values to calculate dose and times.
-
Easy integration into interior spaces due to its linear format and electronics optimized for the 30W HNS lamp.
Use cases
-
Rooms, corridors and toilets in offices, shops and hospitality (scheduled cycles without presence).
-
Lobbies, waiting rooms and common areas with intermittent traffic.
-
Warehouses and technical rooms where a reduction of microbial load on visible surfaces is required.
Guide to installation times (installation height 3 m)
-
Up to 8 m²: 30 min
-
8–12 m²: 45 min
-
12–15 m²: 60 min
-
>15 m²: install multiple units
Effectiveness depends on the UV-C dose (irradiance × time), the line of sight , and shadows. Adjust height, number of units, and cycles according to the room layout.
Frequently Asked Questions
-
Can it operate with people present? No. UV-C light can damage skin and eyes. This light fixture is designed to operate only when unoccupied ; the IR sensor turns off the system if it detects movement.
-
Does it turn itself back on after detection? No. It requires a manual reset once the area is cleared.
-
Does it generate ozone? No. The HNS lamp emits at ~254 nm and is ozone-free .
-
How do I check the irradiance? After 5 minutes of stabilization, measure at 1 m with a UV-C radiometer. For reference, typical initial values are >1.2 W/m² @ 1 m and >0.96 W/m² at 9,000 h.
Safety information and warnings
- For UV-C disinfection only; not for general lighting .
- Signpost and block access points during the cycle; keep doors/windows closed and avoid drafts.
- Polymeric materials can degrade from prolonged UV-C exposure; protect them when necessary.
- Installation and maintenance by qualified personnel; use appropriate eye and skin protection.
- The lamp contains mercury (Hg); dispose of waste according to local regulations.
Project description
OSRAM AirZing PRO 5030 indoor UV-C luminaire; PURITEC® HNS® T8 30 W (G13) lamp, 253.7 nm, ozone-free; UV-C flux 11–12 W ; irradiance >1.2 W/m² @1 m (initial) and >0.96 W/m² @1 m 9,000 h; input 220 V ±10 % (50/60 Hz); system power ≈ 34 W; THD <20 %; PF ≥ 0.9; lamp current 360 mA; IR presence sensor with immediate switch-off and 30 s start-up delay; installation 2.5–4 m; dimensions 1058 × 54 × 78 mm; weight ≈ 1.3 kg.
