Audibax Dayton 600 - Class AB Power Amplifier 2×300 W RMS at 4 Ω with XLR/Jack inputs and Speakon outputs
The Audibax Dayton 600 is a Class AB stereo power amplifier designed for professional sound reinforcement in installations and rentals. It delivers 2 x 300 W RMS into 4 Ω with a flat frequency response of 20 Hz – 20 kHz , providing punch and definition for both music and speech. It features XLR and 6.35 mm jack signal inputs per channel for seamless integration with mixing consoles and processors, and speaker outputs via binding posts and Speakon connectors , including a dedicated Speakon connector for bridge mode . The 19" rack- mount (standard width) and 105 mm high metal chassis is built for everyday use, with front-panel gain controls and clear indicators for power , signal , clip , and fault .
For applications requiring a single high-power line, the Dayton 600 allows bridge operation with a minimum load of 8 Ω . Its rear panel includes a stereo/bridge switch and a ground lift switch to reduce unwanted feedback and noise. Weighing approximately 11.5 kg and measuring 485 × 370 × 105 mm , it is a robust and compact solution for sound reinforcement in halls, houses of worship, bars, gyms, or mobile events.
Main features
-
Power: 2×300 W RMS at 4 Ω; maximum power 2×700 W.
-
Architecture: Class AB amplifier, 2 channels ( Low-Z ).
-
Frequency response: 20 Hz – 20 kHz.
-
Inputs: Balanced XLR and 6.35 mm jack per channel.
-
Speaker outputs: terminals + Speakon connectors; dedicated jumper Speakon .
-
Modes: stereo / bridge (rear switch).
-
Controls and indicators: independent A/B gains, signal LEDs, clip, fault and power.
-
Power supply: AC 230 V, 50/60 Hz.
-
Construction: metal chassis, black color, 19" rack mount
-
Dimensions: 485 × 370 × 105 mm; Weight: 11.5 kg.
Product benefits
-
Solid and reliable sound: Class AB topology balances warmth and dynamic control, ideal for music and vocal PA systems.
-
Professional connectivity: accepts balanced signals via XLR or 6.35 mm jack and delivers to speakers via terminals or Speakon.
-
Real versatility: works in stereo or bridged mode (load ≥ 8 Ω) to power a higher power line.
-
Safe operation: Clip and fault LEDs, ground switch and rear ventilation for continuous use.
-
Easy integration: 19” rack format, compact dimensions and moderate weight for transport or fixed installation.
Use cases
- Fixed installations in bars, gyms, multipurpose rooms, temples and educational centers.
- Mobile events and rental companies that need a reliable and easy-to-wire stereo stage.
- Sub-bass/bass reinforcement in small configurations or line feed in bridge mode (≥ 8 Ω).
Frequently Asked Questions
-
Can I use it in bridge mode? Yes, it has a stereo/bridge switch and a dedicated Speakon connector; it uses loads ≥ 8 Ω .
-
What output connectors does it have? Speaker terminals and Speakon connectors per channel, plus a jumper Speakon connector .
-
Does it accept balanced inputs? Yes, via XLR and 6.35 mm jack .
-
What is its operating frequency range? 20 Hz – 20 kHz.
Installation recommendations
- In bridge mode , connect only one load ≥ 8 Ω and use the bridge Speakon indicated on the rear panel.
- Ensure rear ventilation and avoid saturating the input; use the signal and clip LEDs as a gain guide.
- For long lines, use speaker wire with an appropriate gauge and quality Speakon connectors.
Project description
Class AB stereo power amplifier, 2 channels ( Low-Z ). Power: 2 x 300 W RMS at 4 Ω; peak power 2 x 700 W. Frequency response: 20 Hz–20 kHz. Inputs per channel: XLR and 6.35 mm jack. Speaker outputs: binding posts and Speakon; dedicated Speakon connector for bridge mode. Stereo/bridge switch and ground lift switch. Power supply: AC 230 V 50/60 Hz. Dimensions: 485 x 370 x 105 mm. Weight: 11.5 kg. Color: Black; metal chassis, 19" rack mount.
