AKG 3096M02080 - RF Board BD8 for SPR4500 receiver (570–600 MHz band)

AKG 3096M02080 - RF Board BD8 for SPR4500 receiver (570–600 MHz band)

The AKG 3096M02080 is the complete RF board for the SPR4500 bodypack receiver of the IVM4500 monitoring system, calibrated for the BD8 band (570–600 MHz). It is an original factory spare part designed to restore the receiver's RF stage when it has suffered failures in the front-end, the oscillator or the tuning module, or to migrate bands complying with local regulations. As it is the specific RF board, it respects the original features of the system: antenna diversity, sensitivity and tuning stability, guaranteeing full compatibility with the SPR4500 chassis without modifications.

For optimal performance on the BD8, AKG specifies the use of the corresponding 111 mm antennas (antenna assembly 3002M21040). Replacement should be performed by a qualified service technician following AKG's service documentation to ensure proper wiring, shielding, and RF testing after service.

Main features

• Official AKG replacement part for SPR4500 (IVM4500), “complete RF board” format.
• BD8 band with range 570–600 MHz , conforming to the 4500 series band coding.
• Reference equivalence : part suffix “ …80 ” = BD8 for RF board 3096M020 80 .
• 100% mechanical and electrical compatibility with the SPR4500 frame and mainboard.
• Associated antennas for BD8, 111 mm long (band-specific).
• Typical use : RF stage repair or receiver band switching in professional installations.

Product benefits

• Recovery of factory performance (sensitivity, selectivity and stability in BD8).
• Minimizes downtime versus complete equipment replacements.
• Cost and sustainability : extends the life of the IVM4500 system while maintaining the existing investment.

Compatibility and installation notes

• Direct compatibility : SPR4500 (IVM4500 series IEM receiver body).
• Not compatible with SPR4 (uses RF board 3051M020** from another family) or with SST4500 transmitters (RF board 3050M030**).
• If migrating to BD8 from another band, also replace the antennas with the model/length appropriate for the band (BD8 → 111 mm).
• Recommended intervention by a qualified technician , with ESD handling and RF functional verification after assembly.

Use cases

• Service and repair of SPR4500 receivers with tuning or sensitivity errors or damaged front-end.
• Adaptation of the IEM fleet band to the frequency ranges permitted in each country/region.

Frequently Asked Questions

• Does it work with the SPR4 (IVM4)? No. The SPR4 uses a different RF board reference (3051M020**) than the 3096M020**.
• Are antennas included? No. The RF board and antennas are supplied separately; 111 mm antennas are recommended for the BD8.
• What is the BD8 band? BD8 corresponds to approximately 570–600 MHz in the 4500 series.

Description for projects

AKG 3096M02080 RF board for SPR4500 IEM receiver (IVM4500 series). BD8 band ( 570–600 MHz ). “Complete RF board” format with “ …80 ” suffix for band identification. Associated antennas for BD8: 3002M21040 , length 111 mm (not included). Not compatible with SPR4 or SST4500 transmitters.