Alesis 628130127 - Snake Cable for NITROMESHKIT

Alesis 628130127 – Snake Cable (Wiring Harness) for Nitro Mesh Kit

The Alesis 628130127 is the original snake cable (wiring harness) for Nitro Mesh kits, designed to quickly and neatly connect all the kit’s pads to the Nitro module. It uses a multi-pin DB-25 connector at the end of the module and a bundle of 1/4” jacks labeled by pad (Kick, Snare, Tom 1–3, Hi-Hat, Crash, Ride, Hi-Hat Control), color-coded for error-free installation. It is an official replacement part and is also compatible with Nitro Mesh Special Edition and Nitro “v1”.

Main features

• Official Alesis replacement part for Nitro Mesh Kit (compatible with Nitro Mesh Special Edition and Nitro v1).
• Clean connection to the module via DB-25 and 1/4” (6.35 mm) jack branch clearly labeled per pad.
• Guided Setup : The color and labeling of each branch makes it easy to identify Kick, Snare, Toms, Hi-Hat, Crash, Ride and Hi-Hat control.
• Harness design for neater cable management , quick assembly/removal and less tangling.
• Expansion support: The module's Tom 4 and Crash 2 ports are connected with separate cables (they are not part of the snake).

Product benefits

• Error-free assembly thanks to labeling and color coding: plug and play in minutes.
• Less noise and pulling : The harness bundles the wiring, reduces stress, and helps ensure clean routing through the rack.
• Factory Restore : Restore the kit's original functionality if you have lost or damaged the wiring.

Compatibility and notes

• Compatible kits: Nitro Mesh Kit and Nitro Mesh Special Edition (also referred to as Nitro v1).
• About other Alesis modules: While several use DB-25 connectors, the pinouts are not universal . Use this harness only with compatible Nitro/Nitro v1/Nitro Mesh modules.
• Extra module inputs: Tom 4 (TRS 1/4”) and Crash 2 (TS/TRS 1/4”) are connected separately, outside the snake.

Frequently Asked Questions

• What's included with the harness? A harness with the DB-25 connector for the module and multiple 1/4" jacks labeled for each pad.
• Does it work with Nitro Max, Surge, or other modules? Similar harnesses exist, but the pinouts differ. Check compatibility specifically before using it with other modules.
• How do I connect the Tom 4 / Crash 2 expansions? Use standard 1/4" cables directly to their module inputs (they don't go into the snake).

Description for projects

Alesis 628130127 Wiring Harness for Nitro Mesh/Nitro v1: DB-25 connector to module and 1/4” (6.35 mm) jack branches labeled for Kick, Snare, Tom 1–3, Hi-Hat, Crash, Ride, and Hi-Hat control; compatible with Nitro Mesh and Nitro Mesh Special Edition; Tom 4 and Crash 2 expansion inputs on the module via separate cables.