Alesis 102150143 - 10" Single-Zone Cymbal Pad for the Nitro Mesh Kit / Surge Mesh Kit (with choke)

Alesis 102150143 – 10” Cymbal Pad (Single Zone) with Choke for Nitro Mesh / Surge Mesh

The Alesis 102150143 is the original 10-inch single-zone , choke -activated cymbal pad used in the Nitro Mesh and Surge Mesh kits. It offers a quiet rubberized surface and stable response for precise accents and cuts, integrating plug-and-play via the kit’s 1/4” jack harness and mounting to a standard rackmount cymbal arm/clamp. It’s the official replacement part for restoring your set’s crash or adding an additional cymbal to compatible inputs on the module.

Main features

• Diameter 10” (25.4 cm) with low noise rubber surface.
• Single Zone + Choke : Single zone trigger with rim muting .
• Confirmed compatibility with Nitro Mesh and Surge Mesh (also valid for related families listed by the manufacturer).
• Standard 1/4” (6.35 mm) connection via kit harness.
• Easy mounting on cymbal arm with felts and wing nut from the rack itself.

Product benefits

• Clean and expressive cuts thanks to the integrated choke function.
• Replacement without surprises : approved part that maintains factory feel and sensitivity.
• Set extension : Use as an additional crash when the module offers the corresponding input.

Compatibility and technical notes

• Confirmed Kits: Nitro Mesh / Surge Mesh (replacement listing “10" Single-Zone Cymbal Pad with Choke”, ref. 102150143-A ).
• Wiring: The choke is transmitted via a TRS connection when the module's input supports it. On some modules, Crash 2 is TS and doesn't send the choke command (refer to your module's manual).
• Nitro/Surge Module Expansion: Expansion ports allow for the addition of a crash ; the Surge supports choke pads via TRS , while the classic Nitro specifies Crash 2 via TS (Trigger Only).
• Spare part contents: 1 × 10” cymbal pad. Does not include arm, clamp, felts or cable.

Frequently Asked Questions

• Can it be used as a ride or hi-hat? It's the kit's typical crash. It can be reassigned as a ride in modules that support it; the hi-hat requires its own pedal/controller.
• What do I need for the choke? Connect it to a compatible input via a 1/4" TRS connector (on some modules, the additional crash input is a TS input and doesn't transmit a choke).
• Is it compatible with Surge Mesh SE / Forge / DM7X? Yes, it's a common 10" choke listed for these models by official distributors.

Description for projects

Alesis 102150143-A cymbal pad, 10” (25.4 cm) , single choke zone ; rubberized surface; 1/4” connection (TRS choke on compatible inputs); mounts on standard cymbal arm; official replacement part for Nitro Mesh / Surge Mesh .